Zenith TVSB1320 Operation Manual & Warranty page 16

Make sure:
• Use the remote control for this procedure.
• TV/VCR power must be turned on.
In the example below, the clock is to be set to:
DATE March 1st, 1999
SETTING TIME 5:40PM
Press the MENU button.
Press the PLAY or STOP
button to point to "SETTING
CLOCK"•
Then, press the F.FWD
button.
MENU
TIMER PROGRAMMING
PICTURE CONTROL
_- SETTING CLOCK
CHANNEL SET UP
USERS SET Up
LANGUAGE {ENGLISH}
CAPTION [OFF]
ZERO RE _qJRN
T[M_ SEARCH
Press the PLAY or STOP
button to point to "MANUAL
CLOCK SET".
Then, press the EFWD
button.
S_ TT_NG CLOCK
AUTO CLOCK {ONI
AUTO CLOCK CN[AUTO]
MANUAL CLOCK SET
[OFF]
_
Press the PLAY or STOP
button until your desired
month appears.
(Example: March -->03)
Then, press the F.FWD button.
Press the PLAY or STOP
button until your desired day
appears.
(Example: 1st --) 01)
Then, press the F.FWD button.
:
Press the PLAY or STOP
button until your desired
year appears.
(Example: 1999)
Then, press the EFWD button.
MANUALCLOCKSET
MONTHDAY YEAR
MINUTE
- MANUALCLOCKSET -
MONTHDAY YEAR
O3 I:_01 ¸ _
HOUR MINUTE
MANUALCLOCKSET
MONTRDAY YEAR
03 01 MeN1999
HOUR M_NUTE
Press the PLAY or STOP
button until your desired
hour appears•
(Example: 5, PM)
Then, press the F.FWD button.
Press the PLAY or STOP
button until the desired
minute appears•
(Example: 40)
MANUAL CLOCK SET
MONTH DAy YEAR
_03 I 0_ MON_999
HOUR M_NUTE
_ _!!_ ?•!i •
Press the MENU button•
Although seconds are not
displayed, they begin
counting from 00 when you
i 5 40P 1
press the MENU button. Use this feature to
synchronize the clock with the correct time.
NOTE: When unplugging the AC cord or if there
is a power failure for more than 30 seconds, you
may have to reset the clock•
: Z.:
If you want to change the clock,
t ) Follow steps [1] and [2].
2) Select where you want to change using the
F.FWD or REW button.
3) Enter correct numbers using the PLAY or
STOP button.
4) Press the MENU button to start the clock.
NOTE:
If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and
press the F.FWD or REW button to turn [OFF]
this function. Then you can manually
adjust the clock•
- 16 - EI_
8L0"