Zenith TVSB1320 Operation Manual & Warranty page 9

OPERATING CONTROLS AND FUNCTIONS
NOTES:
• We do not recommend that you use a "univereaJ" remote control to operate this TVNCR. Not all of the functions
may work. Call the manufacturer of the universal remote control, not Sears, if you have problems with it.
• Depending on your antenna system, you may need other connectors in addition to the coaxial cable supplied
with this unit. See Antenna/Cable Connections section of this manual.
- TV/VCR FRONT PANEL -
[ l jlu ,UJIJj
2 3 4 5 6 7 8910 11 12 14
....... 2 5
'---4
........ 24
.--11
---12
.... 3
........ 7
.... 22
..... 21
1 EARPHONE jack-
Connects to earphones (not supplied) for personal
listening. The size of jack is 1/8" monaural (3.5mm).
2 AUDIO input jack-
Connect to the audio output jack of your audio
equipment, video camera or another VCR
3 VIDEO input jack-
Connect to the video output jack of your video
camera or another VCR.
4 STOP button -
Press to stop the tape motion.
EJECT button-
Press in the Stop mode to remove tape from "FVNCR.
Select the setting modes from the on-screen menu.
Press to enter digits when setting program.
(For example: Setting clock or timer program)
5 REW button-
Press to rewind the tape, or to view the picture ,
rapidly in reverse during the PLAY mode.
Press to select a mode from a particularmenu.
(For example: Language or user's set up)
6 PLAY button-
Press to start the PLAY mode.
Select the setting modes from the on-screen menu.
Press to enter digits when setting program.
(For example: Setting clock or timer program)
7 F.FWD button-
Press to rapidly advance the tape, or to view the
picture rapidly in forward during playback mode.
When setting program (For example: Setting clock
or timer program), press to determine your selec-
tion and proceed to the next step you want to input.
Press to determine setting modes from on-screen
menu. Press to select a mode from a particularmenu.
(For example: Language or user's set up)
-g- EN
8L02