Zenith TVSB1320 Operation Manual & Warranty page 23

Make sure:
• TV/VCR power must be turned on.
• Insert a cassette tape with its erase prevention tab in place, (If necessary, rewind or fast forward
the tape to the point you want to begin recording.)
You can ONLY watch the same TV program
that is being recorded.
Press the number buttons
°n the remote control or the I CH101
CHANNEL UP or DOWN
button.
Remember: If the TVA/CR is
connected to a cable box or
satellite box, the TV/VCR must be on CH3 or
CH4. Then the channel to be recorded must be
selected on the cable box or satellite box,
Press the SPEED button to
select the desired tape
speed (SP/SLP).
Press the PAUSE/STILL button to temporarily
stop recording.
Press the PAUSE/STILL or _/pAUsE
REC button to resume
L
recording,
NOTE: sP
• After five minutes, the TV/VCR will
automatically switch to the Recording mode to
prevent tape damage.
• If "CLOSED CAPTION [ON]" is selected, the
On-Screen Display will appear for 5 seconds,
then disappear,
Press the REC button.
REC
SP
Press the STOP button when recording is
completed.
- 23 - EN
8L02