Timer Recording: One-Time Record - Zenith TVBR1322Z Operating Manual

Timer Recording: One-Time Recording
Use one-time recording to record what you see on your TV screen
Erasure Tab
Removed
Recording Tapes
1 Insert a tape into the tape loading compartment. Rewind or advance
the tape to the position you want the recording to begin. (You can
only record on tapes which have the erasure prevention tab intact.
If the VHS cassette does not have the erasure tab intact, eject the
tape and paste a piece of clear mylar tape over the security tab hole
to be able to record on the tape.)
2 Tune to the channel or the input source you want to record so that
its image appears on the screen. Press REC/OTR to record the image
on the screen.
3
Press PAUSE/STILL to momentarily halt recording, press PAUSE/STILL
again to resume recording.
4
Press STOP to halt recording, press EJECT to remove tape when fin-
ished.
Press REC/OTR repeatedly to choose Timed Instant Timer Recording. Each addi-
tional press of REC/OTR increases the recording time by 30 minutes for up to
a maximum of 5 hours.
Additional recording options are available such as Timer Recording; primarily
used to record tapes while you are away. Recording speed and other options
are available, see the next two pages. Also see the Table of Contents on page
7 for additional recording options.
P A G E 3 6
(One-Time Recording)
OTR 0:16
1:19 PM FRI CH20
00:19:46 SP
One-time recording on-screen
status display
POWER
MENU
-
SET
ENTER
TV/MONITOR
CH
VOL
EJECT
CH
REW PLAY
Play
REC/OTR
STOP
Record
1
2
4
5
7
8
SPEED
Q. VIEW
0
CA
+
SET
CANCEL
CALL
VOL
MUTE
F.F
PAUSE/STILL
INPUT SEL.
3
TVCAP/TEXT
6
SLEEP
9
206-3481