Zenith TVSB1320 Operation Manual & Warranty page 12

CABLE WITH CONVERTER/DESCRA_v'_BLER
sex OR SATELLITE BOX
You cable system may require a converter box,
or if you use a satellite system, you will need a
satellite box. In each case, you must connect a
75 ohm coaxial cable (not supplied) from the
cable system wall outlet to the box, and another
75 ohm coaxial cable from the box to the
Antenna terminal of your TVNCR. See below.
Satellite Box or
_ Cable Box (Not supplied)
From Cable System
or Satellite Dish
75-ohm Coaxial
Cable (not
supplied)
ANT
©
TO RECORD A SCRAMBLED/UNSCRAMBLED
CHANNEL
1. Set the TV/VCR channel selector to the output
channel(3 or 4) of the cable or satellite box.
2. Select the channel to be recorded or
viewed on the cable or satellite box.
1) Open the battery compartment cover by
pressing the cover on the remote unit in the
direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.
When using an external input signal (another
VCR or video camera), connect the player's
audio/video output
cables to the AUDIO IN/ AUX
VIDEO IN jacks of your
TV/VCR. Then press the
CHANNEL UP or DOWN
button until "AUX"
appears on the screen.
- 12 - EN
8L02