Table of Contents
Advertisement
Basic
Connections
Antenna or Cable
t
Coaxial Cabl_L
Flat Feeder
-:
AC Power
M ching Transform
Cord
\
AC
Outlet
Video Cable
_T _
(supplied)
_
udio Cable
(supplied)
TV
75 ohm terminal
ANTENNA-
IN (Antenna
or Cable
input)
RF
OUT
RF Cable
(supplied)
Back of VCR
CHECK CONTENTS
Make sure the package contains all of the accessories
listed in "SPECIFICATIONS" (_
pg. 56).
SITUATE VCR
Place the VCR on a stable, horizontal surface.
CONNECT VCR TO TV
The connection method you use depends on the type of
TV you have.
RF Connection
• To Connect To A TV With NO AV Input Terminals...
a- Disconnect the TV antenna from the TV.
b- Connect the TV antenna cable to the ANT IN jack
on the rear of the VCR.
c- Connect the supplied RF cable between the RF
OUT jack on the rear of the VCR and the TV's
antenna terminal.
AV Connection
• To Connect
To A TV With AV Input
Terminals...
a- Connect
the antenna,
VCR and TV as shown in
the illustration.
b- Connect
an Audio/Video
Cable (supplied) between
the AUDIO
OUT
and VIDEO
OUT
jacks on the rear
of the VCR and the AV IN jacks on the TV.
CONNECT VCR TO
POWERSOURCE
Connect the power plug to an AC outlet.
• The clock and tuner will automatically
be set when
the antenna is connected and when the AC is first
connected to the VCR (D::_' pg. 7).
FINAL PREPARATION FOR
USE
Select the VCR channel (3 or 4) by setting the switch
on the rear of the VCR as shown in the illustration.
Turn on the power
to the TV. You are now able to perform
simple
playback
(_" pg. 22) and recording (_" pg. 23).
(If 'Auto'
is displayed
on the front display
panel,
the
clock is being
set automatically.
Wait for the time
to be
displayed
before
powering
on the VCR.)
NOTES:
• The VCR channel is the channel on the TV which will display
the audio and video signals from the VCR. The VCR's CH3-
CH4 switch sets the VCR channel to CH3 or CH4.
• The CH3-CH4
switch is preset to the CH3 position.
5et to CH4 if CH3 is used for broadcasting in your area.
• If your TV has no AV input terminals, set the channel on the
TV to correspond to the CH3-CH4
switch on the back of the
VCR.
• Even if your TV has AV input terminals, you must connect it
to the VCR using an RF cable in order to record one show
while watching another (u_ pg. 34).
• For full identification
of the VCR's rearpanel,
refer to the
Index (REAR VIEW_
pg. 58).
Advertisement
Table of Contents
