Vcr Plus+ Timer Programming - JVC HR-VP638U Instructions Manual

VCR Plus+
Timer
Programming
J efore VCR Plus+ Timer programming, see "VCR Plus+
Setup" on page 19.
NUMBER
LOAD A CASSETTE
Make sure the record safety tab is present.
• The VCR's power comes on automatically.
• If you're watching on channel 3 or 4, press TV/VIDEO
to select the VIDEO mode. VIDEO is displayed on the
front display panel.
ACCESSVCRPLUS+ SCREEN
Press MENU on the remote
control.
VCR PLUS+
• The clock must be set in
order to access the VCR
Plus+ screen. If you
haven't set the clock, the PRESS N UMeER K _(0-g)
Main Menu screen
PRESS (MENU)
TO MAIN MENU
appears when you press
MENU. Refer to page 7 for the Dual Quick Set
procedure or page 9 for the dock setting procedure.
ENTERPLUSCODE NUMBER
Press the appropriate NUMBER keys to enter the
PlusCode number printed in the TV listings for the TV
program you wish to record.
• To make corrections, press CANCEL and input the
correct PlusCode number.
• If the PlusCode number you input is incorrect,
"ERROR" may appear on the screen to advise you of
the error. This happens when the PlusCode number is
for a program which has already passed. "ERROR" is
displayed for about 4 seconds and the VCR Plus+
screen reappears (step 2).
CHECK INPUT DATA
Press OK and the Program _' PROGRAM1
screen appears. / (VCRPLUS+12345678)
The PlusCode number you DATE 7/10 FRI
START 8:00PM
entered appears in the STOP 9:00PM
Program screen. Check to CHANNEL 8 SP
make sure it's accurate. I PREgS(8=DAILY, 9=WEEKLY
/ SP/EP=REC S PEED)
• To timer-record daily or I, PflE$S(MENU)TOERD
weekly serials, press
DALLY (NUMBER "8") or WEEKLY (NUMBER "9").
"DALLY" or "WEEKLY" appears on the Program
screen.
• If you made a mistake, press CANCEL and, after
pressing MENU as many times as necessary to access
the VCR Plus+ screen, input the correct PlusCode
number.
SETTAPESPEED
Press SP/EP.