Table of Contents
Advertisement
VCR Plus+
Setup
POWER
The VCR Plus+ timer programming system eliminates the need
to input channel, date, start and stop time data when setting the
timer record function. Simply key in the PlusCode number for
the TV program you wish to record (found in most TV listings)
and the VCR's timer is automatically
programmed.
Depending on the TV or cable stations that you receive and the
channel numbersthat they are received on in your area, you may
have to make certain changes in your VCR's "Guide Channel Set"
menu to get proper results. Please read the following
information
carefully to find out which tasks you need to perform.
Before VCR Plus+ setup you must have performed the following
procedures:
• Dual Quick setting (_" pg. 7)
or
Clock setting (_ pg. 9)
Tuner setting (_:_" pg. 12)
• Tuner and cable box setting if you receive your TV channels
through a cable box (a:_'pg. 15)
Channel
Number
Matching
Most TV listings have a chart indicating the "Guide Channel"
number assigned to each station for purposes of VCR Plus+
programming. Check the chart in your TV listings and see if the
Guide Channel numbers listed for the stations you receive are
the same as the channel number on which each is received by
your VCR or cable box.
**SPECIAL
NOTES
FOR CABLE SUBSCRIBERS**
• In many
instances,
,:able
TV stations have VCR Plus+ Guide
Channel
numbers
that DO NOT
match
the number
of the
channel
on which
you receive the station. Check
your TV
listings, or contact
your
cable supplier
for details.
• Many
normal
broadcast
rv
stations can be viewed
on cable.
Check
your
TV listing, or contact your
cable supplier for
details.
If the numbers match, go directly to "VCR Plus+ Timer
Programming" (0::_" pg 36).
If the numbers
are different,
and you want
to be able to timer
record
programs
from those
stations, you have to informthe
VCR of the mismatch.
Go to step 1. If you will
not want
to timer
record from those
stations, you can go directly
to "VCR Plus+
Timer
Programming"
i0:_r" pg. 36).
TURN ON THEVCR
Press POWER. If watching channel 3 or 4, press TV/
VIDEO to select the TV's VIDEO mode. VIDEO is
displayed on the front display panel.
ACCESS MAIN MENU
SCREEN
Press MENU
as many
times
as necessary.
CONTINUED
ON NEXT PAGE.
Advertisement
Table of Contents
