Table of Contents
Advertisement
Auto Picture
POWER
PLUS]
Playback
The VCR assesses the quality of the tape once you initiate playback.
Before beginning, perform steps I and 2 on page 22.
START PLAYBACK
Press PLAY.
[
• The VCR adjusts the
playback picture quality
\
\
I / /
--
AUTO PICTURE --
based on the quality of
/
/
I \ \
the tape in use.
NOTE:
• The Auto Picture screen only appears at the beginning of
automatic tracking. Even though the screen doesn't appear
after that, the Auto Picture function is operative.
• SUPERIMPOSE must be set to "ON" or the Auto Picture screen
will not appear (_" lag. 28).
Your VCR is equipped with the Auto Picture feature, which
checks the condition of the tape and compensates accordingly,
giving you the best-possible playback picture every time. The
default setting is "ON".
Preparation
TURN ON THEVCR
Press POWER. If watching channel 3 or 4, press IV/
VIDEO to select the VIDEO mode. VIDEO is displayed
on the front display panel.
ACCESS MAIN MENU
SCREEN
Press MENU as many times as necessary.
ACCESS AUTO PICTURE
SCREEN
PressCHAT
or SHUTTLE
f
MAIN MENU
PLUS Av to place the
arrow next to "AUTO
PROGRAM
SET
FUNCTION
SET
PICTU RE", then press OK.
TUNER S ET
CUSTOM SET
"-*-AUTO PICTURE
PRESS (A,_,),THEN (OK)
PRESS (MENU) TO END
SELECT MODE
Place the arrow next to
"ON" by pressing CHAr
or SHUTTLE PLUS AV.
AUTOPICTURE
_ON
OFF
PRESS (A ,v),
TO SELECT
PRESS (MENU) TO END
NOTE:
When using rental tapes, or tapes recorded on other
VCRs, select "ON" or "OFF"as desired.
RETURNTO NORMAL
SCREEN
Press MENU as many times as necessary.
Advertisement
Table of Contents
