Table of Contents
Advertisement
Assemble
Editing
Assemble Editing adds one recorded scene to another in
succession.
To use your VCR as the r(_order ...
LOAD CASSEI-IES
Insert the original cassette in the player, and the
recording cassette in the recorder.
SETTAPESPEED
Set to "St_ or "EP" by pressing the SP/EP button on the
remote control.
ENGAGE RECORD-
STANDBY MODE
Press and hold PAUSE, and press REC.
i
FIND EDITSTART POINT
Play back the original tape until you reach the scene to
be edited.
STARTEDITING
When you reach the scene on the original tape to be
edited, press PLAY to initiate the recorder's record
mode.
STOPEDITING
Press PAUSE to pause the tape in the recorder.
CONTINUE EDITING
Repeat steps 4 through 6 to add additional scenes.
NOTE:
Assemble Editing is also possible using your VCR as the
playback deck.
Advertisement
Table of Contents
