Advertisement

Quick Links

LPT0502-001B
COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD.
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder.
Before use, please read the safety information and precautions to
ensure safe use of your new VCR.
CAUTIONS
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION:
This video cassette recorder should be used with AC 120V
60Hz only.
To prevent electric shocks and fire hazards, DO NOT use any
other power source.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU
FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
VIDEO CASSETTE RECORDER
HR-VP793U
INSTRUCTIONS
CAUTION:
Changes or modifications not approved by JVC could void
user's authority to operate the equipment.
Declaration of Conformity
Model Number:
Trade Name:
Responsible Party:
Address:
Telephone Number: 973-315-5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Failure to heed the following precautions may result in damage
to the VCR, Remote or video cassette.
1. DO NOT place the VCR . . .
...in an environment prone to extreme temperatures or
humidity.
...in direct sunlight.
...in a dusty environment.
...in an environment where strong magnetic fields are
generated.
...on a surface that is unstable or subject to vibration.
2. DO NOT block the VCR's ventilation openings.
3. DO NOT place heavy objects on the VCR or on the Remote.
4. DO NOT place anything which might spill on the top of the
VCR or on the Remote.
5. AVOID violent shocks to the VCR during transport.
VCR Plus+, C
Development Corporation.
d
,
The VCR Plus+ system is manufactured under license from
Gemstar Development Corporation.
For Customer Use:
● Cassettes marked "VHS" (or "S-VHS") can be used with this
video cassette recorder. However, S-VHS recording is not
possible with this model.
● This model is equipped with SQPB (S-VHS QUASI PLAYBACK)
that makes it possible to play back S-VHS recordings with
regular VHS resolution.
● HQ VHS is compatible with existing VHS equipment.
● As an E
product or product model meets the E
energy efficiency.
HR-VP793U
JVC
JVC Americas Corp.
1700 Valley Road Wayne, N.J. 07470
3
and PlusCode are registered trademarks of Gemstar
Enter below the Model No. and Serial No. which are located
on the rear of cabinet. Retain this information for future
reference.
Model No.
Serial No.
S
®
Partner, JVC has determined that this
NERGY
TAR
Printed in Malaysia
1100 IYVfIDfPJ
S
®
guidelines for
NERGY
TAR

Advertisement

Table of Contents
loading

Summary of Contents for JVC HR-VP693U

  • Page 1 1100 IYVfIDfPJ Dear Customer, CAUTION: Thank you for purchasing the JVC VHS video cassette recorder. Changes or modifications not approved by JVC could void Before use, please read the safety information and precautions to user’s authority to operate the equipment.
  • Page 2 IMPORTANT PRODUCT 3. Power Lines An outside antenna system should not be SAFETY INSTRUCTIONS located in the vicinity of overhead power lines or Electrical energy can perform many useful functions. But improper other electric light or use can result in potential electrical shock or fire hazards. This power circuits, or where product has been engineered and manufactured to assure your it can fall into such...
  • Page 3: Buttons, Connectors And Indicators

    Rear Panel d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper AC power cord adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
  • Page 4: Connections And Plug&Play Setting

    Perform Plug&Play setup Connections and Plug&Play Plug the AC power cord into an AC outlet. Do not turn on the Setting VCR. The clock and tuner channels will be set automatically. The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels.
  • Page 5: Clock Setting

    – Initial Settings – Clock Setting Setting clock manually — Manual Clock Set Perform clock setting only if the clock has not been set correctly by the Plug&Play setting or if you use a cable box. First follow steps 1 1 1 1 to 2 2 2 2 in “Preparations” above, then go to the following steps.
  • Page 6: Cable Box And/Or Dbs Receiver Control Setting

    LANGUAGE ENGLISH Press to move the highlight bar GUIDE CHANNEL SET by mailing in the completed JVC Cable Mouse Certificate that is CABLE BOX SET (arrow) to “CABLE BOX SET” or “DBS DBS RECEIVER SET included with the accessory package.
  • Page 7: Basic Playback

    PAUSE ( )) repeatedly. left or right. BRAND BRAND ● Press PLAY ( ) to resume ● Push the JOG dial again to JVC (DISH Network) PRIMESTAR normal playback. resume normal playback. ECHOSTAR (DISH SONY (DSS) Rewind/fast-forward Network) RCA (DSS)
  • Page 8: Playback Features

    – Playback – Playing back tape repeatedly (100 times) When the tape is not running — Repeat Play Rewind/fast-forward at high speed During playback, press and hold PLAY ( ) for more than Press REW ( ) or FF OR Turn the JOG dial to the left 5 seconds.
  • Page 9: Recording Features

    Second Audio Recording Recording This VCR’s built-in MTS decoder enables reception of It may be unlawful to record or play back copyrighted material Multichannel TV Sound broadcast. To record a SAP program without the consent of the copyright owner. received, set “2ND AUDIO RECORD” to “ON”. Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record...
  • Page 10: Express Timer Programing

    – Timer Recording – VCR Plus+ Timer Programing ® To timer-record a regular TV broadcast received on the VCR. The PlusCode programing numbers are CATV: To timer-record a cable TV broadcast received on the the numbers next to the program in VCR, or through a cable box (unless “CABLE BOX most TV listing.
  • Page 11: Other Functions

    – Timer Recording – Changing display information To change a program, press the appropriate button: START+/–, STOP+/–, DATE+/–, CH+/–, and/or SP/EP when the Program Each time you press DISPLAY, the display panel screen on which you want to make changes is shown. shows the channel number and the clock time Return to normal screen alternatively.
  • Page 12: Satellite Auto Recording

    ● When this function is set to “OFF”, you can use this terminal as programs, do not use this function, but change the tape speed the remote PAUSE terminal. If your JVC camcorder is equipped manually during timer programing. with the Master Edit Control, you can control the VCR from the ●...
  • Page 13: Multi-Brand Remote Control

    You can easily modify your VCR and the Remote to 01, 03 SONY HITACHI SAMSUNG respond to B code signals. When using two JVC VCRs, set two MAGNAVOX SANYO VCRs and their Remotes to different codes, so that you can MITSUBISHI SEARS operate these VCRs separately.
  • Page 14: Specifications

    – Other Functions – To control two VCRs with the same Remote Specifications You can control two JVC VCRs by switching the remote control step A A A A ), keeping two code for the Remote between A and B ( GENERAL VCRs to different control codes.
  • Page 15: For Servicing (Only In U.s.a.)

    Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.
  • Page 16: Warranty (Only In U.s.a.)

    WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period.
  • Page 17 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...

This manual is also suitable for:

Hr-vp793u

Table of Contents