Computer Input
Input Source Selection (RGB: Computer 1/Computer (Analog))
Direct Operation
Choose either Computer 1(RGB) or Computer 1(Scart) or Computer (Analog) by pressing the INPUT button
on the top control or press the COMPUTER 1 button or Computer 2 on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
Use the Point
▲▼
When Computer 1 is selected, press the Point
button to access the submenu items. Use the Point
buttons to select the RGB input source and then
▼
press the SELECT button.
Note:
When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.45).
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPUTER button
Computer (PC digital)
Computer (AV HDCP)
Computer (Analog)
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1.
Top Control
INPUT button
Input Menu
►
▲
Computer
1
Computer 1 ( RGB)
/(Component) / (Scart)
Computer (PC digital) /
(AV HDCP) /
(Analog)
Video
S-video
RGB(PC digital)
NTSC
RGB(PC digital)
7