Menu Bar - Sanyo XC50 - PLC XGA LCD Projector Owner's Manual

Basic Operation
For detailed functions of each menu, see "Menu Tree" on pages 70-71.
Main Menu
①
②
③
④
⑤
⑥
⑦
⑧
⑨
Input
①
Used to select an input source from Computer 1, Computer  ,Video or S-video.
PC adjust
②
Select Auto PC adj ., Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area-H and Display area-V to adjust
the parameters to match with the PC input signal format (pp.30-32).
Image select
③
For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),
Colorboard and Image 1 - 4 (p.33).
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard
and Image 1- 4 (p.40).
④ Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp ., white balance (R/G/B),
Sharpness and Gamma] (pp.34-35).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp ., white balance (R/G/B),
Sharpness, Gamma, Noise reduction and Progressive] (pp.41-42).
⑤ Screen
For computer source, used to adjust size of the image [ Normal, True, wide, Full, Custom and Digital zoom +/– ]
(pp.35-36).
For Video source, used to set size of image [Normal, wide and Custom] (p.43).
Sound
⑥
Used to adjust the volume or mute the sound (p.24).
⑦ Setting
Used to set the projector's operating configurations (pp.44-57).
Information
⑧
Display the input source information: Input , H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock and Remote control (p.58).
Guide
⑨
The key operation is displayed.


Menu Bar

Sub-Menu
XGA1
(pp.27-28,37-38).