Video System Selection - Sanyo XC50 - PLC XGA LCD Projector Owner's Manual

Instruction manual, plc-xc50a
Hide thumbs Also See for XC50 - PLC XGA LCD Projector:
Table of Contents

Advertisement

1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point

Use the Point
buttons to select Video or S-video
▲▼
or Computer 1(Component) and then press the
SELECT button.

Use the Point
buttons to select System and then
▲▼
press the Point
or the SELECT button. Use the Point
buttons to select the desired system and then
▲▼
press the SELECT button.
Video or S-video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4 .4, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 70p, 105i, and 1080i.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).

Video System Selection

buttons to select Input and
▲▼
or the SELECT buttons.
AV System Menu (Video or S-video)
System Video
AV System Menu (Component)
Video Input
RGB(PC digital)
Component
RGB(PC digital)
Component
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-xc50a

Table of Contents