Safety And Regulatory Compliance; Minimum Hardware Requirements; Processor; Memory - Intel S815EBM1 - Server Board Motherboard Quick Start Manual

Safety and Regulatory Compliance

See the Intel Server Board S815EBM1 Product Guide for product Safety and
EMC regulatory compliance information.
Intended uses: This product was evaluated for use in servers that will be
installed in offices, computer rooms, and similar locations. Other uses require
further evaluation.
EMC testing: Before computer integration, make sure that the chassis, power
supply, and other modules have passed EMC testing using a server board with a
microprocessor from the same family (or higher) and operating at the same (or
higher) speed as the microprocessor used on this server board.
Server board diagram label provided: Place the label inside the chassis in an
easy-to-see location, preferably oriented similarly to the server board.
I/O panel label provided: Place the label on the I/O shield. The cut outs are for
the top serial port and the parallel port.

Minimum Hardware Requirements

To avoid integration difficulties and possible board damage, your system must
meet the following minimum requirements. For a list of qualified memory and
chassis components, as well as the latest list of supported processors see
http://support.intel.com/support/motherboards/server/S815EBM1/compat.htm

Processor

® ®
III processor or Intel
Intel Pentium
NOTE
While the board will electrically support all the processors listed at the
URL above, the thermal solution that ships with the S815EBM1 will only
function properly with processors that have an Integrated Heat Spreader
(IHS). If using a non-IHS processor, you must ensure your thermal
solution is designed for use with the processor.

Memory

The board supports 168-pin SDRAM DIMMs as defined below:
168-pin, 3.3 V SDRAM Dual Inline Memory Modules (DIMMs)
with gold-plated contacts
Unbuffered single or double row DIMMs
133 MHz SDRAM up to two double row DIMMs, or one
double row DIMM and two single row DIMMs
100 MHz SDRAM up to three double row DIMMs
Mixed speed DIMM configuration will default to the slowest speed
DIMM installed
Serial Presence Detect (SPD) memory
Basic Non-SPD support
Intel Server Board S815EBM1 Quick Start Guide
®
Celeron™ processor.
3