Kyocera TASKalfa 650c Operator's Manual page 21

2.MANAGING ADDRESS BOOK
3) [SNMP Settings]
Click this button when you need to verify and change the SNMP settings.
 P.19 "Changing SNMP settings"
Changing SNMP settings
If you cannot find the target same series MFPs on your network, the SNMP settings might be worth suspecting. Verify the
correct SNMP settings on the [SNMP Settings] dialog box and change the settings, if needed. The dialog box can be
accessed by clicking [SNMP Settings] on the Discovery Settings ( P.18) or the [Manual Selection] dialog box ( P.16).
Ask the administrator for details on the SNMP Network settings configured for your same series MFP.
1
2
1) Version
Be sure to have the correct SNMP version set for your same series MFP and select from the following options:
- V1/V2—Select this option to enable SNMPv1 and v2.
- V3—Select this option to enable SNMPv3.
- V1/V2/V3 (for the [Discovery Settings] dialog box only)—Select this option to enable SNMPv1, v2, and v3.
To find your same series MFP under the SNMP V1/V2 environment, the community name set for the target same
series MFP must be "public." For help, consult the administrator.
2) SNMP V3
If SNMPv3 is enabled, use the [option button] to select the way to authenticate users.
User ID File—Select this option when you want to use a user ID file. Click [Browse] and specify the user ID file.
User Name/Password—Select this option when you want to use the user name and password. When this option is
selected, entry or select the following items:
- User Name
- Authentication Protocol
- Authentication Password
- Privacy Protocol
- Privacy Password
 If you select the SNMPv3 to enable, consult your network administrator for preliminary advice on how to
authenticate users.
 Each entry for User Name, Authentication Password, and Privacy Password can consist of up to 32
alphanumeric characters.
2 MANAGING ADDRESS BOOK
About the Address Books 19