Preparations; Accessories; Required Items; Name Of Parts (Main Body) - Kyocera KM-C830D Operation Manual

1. Preparations

1-1

Accessories

• Digital Library CD-ROM
• Network Library CD-ROM
• This Operation Guide <Set-up Edition>
• Quick Configuration Guide (for the network interface)
1-2

Required items

Be sure to prepare the cable that is appropriate to your situation as follows.
• If you are connecting the printer directly to your computer: One parallel cable (IEEE 1284 compliant, less than 1.5 m in length)
• If you are connecting the printer to a network: One network cable (100BASE-TX or 10BASE-T cable)
* When using a 100BASE-TX or 10BASE-T cable, be sure to use the shielded type of cable.
* Depending upon the area or region of purchase, the optional Network Card may be required in order to connect your printer to a network.
1-3

Name of parts (main body)

1 Parallel interface connector
Connect a bi-directional parallel cable here.
2 Serial interface connector
Connect a serial cable here. If you are using the optional Barcode Reader, attach it to this connector.
3 Network interface connector
Connect a 100BASE-TX or 10BASE-T cable here in order to connect the printer to a network.
* Depending upon the area or region of purchase, the optional Network Card may not be standard equipment with this printer.
* NEVER remove the Network Card.
4 Memory Card (CompactFlash) slot
Insert the optional Memory Card (CompactFlash) here.
5 Main switch
Turn this switch ON ( | ) first, prior to using the printer. Always turn this switch OFF (O) when connecting the printer cable, etc.
6 Operation panel
Use when performing settings, etc., at the printer itself.
6
5
1
2
3
4
1