Kyocera KM-C830D Operation Manual page 11

2. Set-up
Use the M and N cursor keys to select "On" and then press
6
the Enter key.
Inch specification
Metric specification
7
Use the M and N cursor keys to select "Change #" and then
press the Enter key.
Inch specification
Metric specification
8
Use the M and N cursor keys to select "DHCP" and then
press the Enter key.
Inch specification
Metric specification
6
Use the M and N cursor keys to select "Off" and then press
9
the Enter key.
Inch specification
Metric specification
10
Use the M and N cursor keys to select "IP Address" and
then press the Enter key.
Inch specification
Metric specification
11 The numeric keys will be used to enter the IP address:
First, enter the first 3 digits of the IP address.
* The numbers you enter will be input into the currently
highlighted area of the display.
Inch specification
Metric specification