Firmware Upgrade - IRiver iHP-100 Series Instruction Manual

GENERAL
BEEP VOLUME
Set beep volume level to 0 / 1 / 2 / 3 step.
RESUME
When ON, player resumes to previous place in
song after STOP or Power OFF.
FADE IN
When activated, volume increases gradually at
playback mode to prevent sudden loudness.
LANGUAGE (Supports 38 languages)
Song title and ID3 tag information is dependent on
the version of the PC operating system that was
used to create it. (For example, if a MP3 files is
created in a Korean version of Windows, the
language setting should be Korean for proper title display)
TUNER REGION
You can set the FM frequency and step according
to your area.
Set them to fit your region to receive FM Radio.
If tuner region is newly set, the old preset stations is
deleted.
36
LOAD DEFAULT VALUE
Initialize all settings to original factory setting.

FIRMWARE UPGRADE

You can upgrade the player's Firmware.
Refer to page 43 for details.
DB SCAN
Turn the Navigation to search by using ID3 Tag on
or off.
When you select "YES" on the DB SCAN, it takes several
seconds until power is on according to the quantity of files
stored on the player.
DISPLAY
BACK LIGHT (Battery)
You can adjust the time that the Backlight
stays on while the player is operated using the
battery built in the player.
Adjust Back Light by OFF / 3 sec / 5 sec / 10 sec.
BACK LIGHT (Adapter)
You can adjust the time that the Backlight
stays on while the player is operated using AC
adapter.
Adjust Back Light by OFF / 3 sec / 5 sec / 10 sec /
Always. If Always is selected, backlight is always on.
37