IRiver iHP-100 Series Instruction Manual page 7

Click "Finish".
The installation is completed.
To connect the iHP-100 Series to the Host PC
Click to turn on the player.
Connect the USB cable to the player and the PC to recognize the correct
information after Host PC is operated.
Type "A"
Type "B"
USB port on the
USB port on the PC
iHP-100 Series
Windows XP and Windows 2000 will display a
"Device Attached" icon.
Windows may ask to install a driver for the iHP driver.
Please follow the provided driver installation guide on
the following page.
Note
The new icon is not created additionally when connecting the player to
the PC with another external equipment is connected to the PC according
to the O.S.
Once installed, open Windows
Explorer and an additional drive
should be listed called 'iHP 100'.
10
To PC
Type "A"
To iHP
USB cable
Type "B"
To install the iHP-100 Series Device Driver
This processing must be done after installing the iHP-100 Series Manager Program.
If the player is recognized on your
PC, "Add New Hardware Wizard"
is activated. Click "Next".
Place a checkmark next to
"Specify a location" and click
Browse.
Once the path has been located,
Click "Next".
Click "Finish"
Completed the installation of "Device Driver".
Chose "Search for the best driver
for your device (Recommended)."
Click Next.
Locate the following path on your
computer. C:\Program Files\
iRiver\iHP 100\drivers, click "OK".
Click "Next"
11