IRiver iHP-100 Series Instruction Manual page 8

To use as a portable storage device
If the player is not connected to the host PC, connect it to the host PC.
(Refer to page 10)
Check the icon of the player on
the PC window and confirm
whether the player is added as a
new drive in Windows Explorer.
To delete files or folders from the iHP-100 Series, select the files
(folders) to be deleted and press "Delete" on the keyboard. Click "Yes"
when asked to confirm the delete.
The iHP-100 Series operates just like an additional hard drive in
Windows Explorer. Files can be copied, deleted, etc.
Note
When the iHP-100 Series is attached to a computer for an extended
period of time, be sure to plug in the AC adapter. Low batteries can
prevent the proper functioning of the iHP-100 Series.
12
Click and Drag files from the PC
to the iHP player.
To disconnect the player from the Host PC
Click the 'Safely Remove Hardware" icon in
the System Tray.
Click "Stop iRiver iHP-100-Driver(X)" or "Safely Remove TOSHIBA
MK1 3GAL USB Disk Drive(X:)". (Where X is the drive letter
assigned to the iHP-100 Series)
Click OK after confirming the "Safe To Remove Hardware" massage.
Disconnect the USB cable between the iHP-100 Series and host PC.
Caution
While accessing the iHP-100 Series drive on the explore or media
player, the player may not be removed from the PC safely. Remove
safely the player after closing the running application programs. And the
player may not be removed from the PC safely according to the internal
comunication of the O.S (Windows XP, etc.). In this case, retry it after a
few minutes. The tray icon on the O.S as like Windows XP, etc. may be
hidden. Click the hidden icon indication on buton to display the icon in
the tray.
13