Table of Contents
Advertisement
User Guide
Firmware
Upgrade
Wi-Fi Update / OTA (Over-the-Air)
1. Connect to a wireless network.
2. When a new firmware version is found, a Firmware
Update Guide window will display on screen.
3. Select [Update] and choose the items for update.
4. Follow the on-screen instructions and proceed with
the Firmware Upgrade.
Refer to page 41 of the manual for more information on
connecting to a wireless network.
Firmware Upgrade may not initialize when the battery
level is too low (A minimum battery level of 50% is
required). Moving to another screen during the file
download will cancel the download.
Do not disconnect from the wireless network during a
Firmware Upgrade. Doing so may cause data corruption
and/or damage to the system.
If an error occurs or the notice in the Notification Bar
disappears during an upgrade, download the Firmware
Upgrade again through [Settings - Update - System
Update].
11
Start
Advertisement
Table of Contents
