Using Ac Power Adapter - IRiver iHP-100 Series Instruction Manual

Using AC POWER ADAPTER

Use only the AC Power Adapter supplied with the player.
The AC operating voltage of this player is 100~240V, 50~60Hz.
Connect the adapter to the 5.0V DC jack on the player and into an AC
outlet.
Recharging Method
Rechargeable function can automatically be activated while the AC adapter is
connected to the player.
When fully charged, charge indicator light turns off.
Charging : Approx. 3 hours (At full discharge)
Discharging (Playback time) : Approx. 16 hours (At full charge)
The playback time is measured in case of 128 Kbps MP3 file playback.
8
To install "Program"
Windows ME, Windows 2000 and Windows XP have the program to support USB
2.0 Storage Device, and you can use this player without any program installation.
Install the iRiver iHP Manager to use the Database Function. Windows 98 SE
require the iRiver iHP Manager to be installed.
Insert the Installation CD into the
CD-ROM drive. Execute "iHP-
100Manager iHP Manager.
exe" on the CD-ROM The
installation screen is appeared.
Enter user information, click
"Next".
Select installation type (Typical,
Minimal, or Custom), click "Next".
Click OK" to install the
installation program.
Select installation folder, click
"Next".
Installation is progressing.
9