Installing The Power Supply - TYAN Thunder n3600QX User Manual

2.14 - Installing the Power Supply

There are six power connectors on your Thunder n3600QX (S4987). The
Thunder n3600QX (S4987) supports 12V and 5.5V SB input DPS power
supplies, please use below combination:
Refer to Diagram B for each power location.
PWR2: PWR Main Connector
PWR3/7/8: PWR Connector reserved for Tyan 2U Barebone only (2Pin x 2)
PWR4: PWR Connector for Tyan M1223 only (2Pin x 2)
Signal Pin Pin
GND 1 3
GND 2 4
32
PWR3/7/8: 4-Pin PWR
Connector reserved for
Tyan 2U Barebone only
PWR4: 4-Pin PWR
Connector for Tyan M1223
only
PWR6: 8-Pin PWR
Connector for Tyan M1223
and M1221
Signal
+12V
+12V