Table of Contents
Advertisement
On the Adapter properties screen, use the arrow keys to select RAID
Properties on the screen and press <Enter>.
When you are prompted to select a volume type, select Create XX (such as
IM, IME or IS) volume as shown in figure X.3. The create New Array screen
illustrates a list of disks that can be added to a volume.
5. Move the cursor to the "RAID disk" column to select a disk. To
add a disk to the volume, change the "NO" to "YES" by pressing "+
Key", "- Key", or "space bar".
5.1 Creating an IM (RAID 1) volume: When the disk is added, you may
either keep the existing data or overwrite it. Press "M" to keep the
Figure X.2
Figure X.3
83
Advertisement
Table of Contents
