Northbridge Configuration Sub-Menu - TYAN Thunder n3600QX User Manual

3.11.1 Northbridge Configuration Sub-Menu

This menu gives options for customizing memory &
Hypertransport settings. Select a menu by highlighting it using the
Arrow ( / ) keys and pressing Enter. The settings are described
on the following pages.
Main Advanced
NorthBridge Chipset Configuration
Memory Configuration
ECC Configuration
IOMMU Option Menu
Power Down Control
Alternate VID
Memory CLK
CAS latency (Tcl)
RAS/CAS Delay (Trcd)
Min Active RAS (Tras)
Row Precharge Time (Trp)
RAS/RAS Delay (Trrd)
Row Cycle (Trc)
Asynchronous Latency
Feature
NorthBridge Chipset Configuration
Power Down Control
Alternate VID
Memory CLK
BIOS Setup Utility
PCI/PnP Boot
[Auto]
[Auto]
:XXX MHz
:XX
:X CLK
:X CLK
:X CLK
:X CLK
:XX CLK
:X ns
Option
Allow DIMMs to enter power down
Auto
mode by deasserting the clock enable
Disable
signal when DIMMs are not in use.
Auto
0.850V
1.050V
1.025V
1.000V
Specify the alternate VID while in low
0.975V
power status.
0.950V
0.925V
0.900V
0.875V
0.825V
0.800V
It shows the clock frequency of the
Read only
installed SDRAM.
66
Security Chipset
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Description
Exit