TYAN Tempest i5100X User Manual page 38

3.2.2 IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus>
keys to change the value of the selected option.
Main
IDE Configuration
SATA Configuration
Configure SATA as
SATA0 (PM)
SATA1 (PM)
SATA2 (SM)
SATA3 (SM)
SATA4 (PM)
SATA5 (PM)
Hard Disk Write Protect
IDE Detect Time Out (Sec)
Feature
IDE Configuration
SATA Configuration
Configure SATA as
Hard Disk Write Protect
IDE Detect Time Out
(Sec)
BIOS Setup Utility
Advanced PCI/PnP
Option
Enhanced
Compatible
IDE
RAID
AHCI
Disabled
Enabled
0~35
(at 5 interval)
Boot Security
[Enhanced]
[IDE]
[Disabled]
[35]
This defines the operation mode of
SATA channel.
Select legacy IDE, RAID or AHCI as the
SATA interface.
Enable/Disable device write protection.
This will be effective only if device is
accessed through BIOS.
Select the time out value for detecting
ATA/ATAPI device(s).
38
Chipset Exit
Select whether the IDE
channels should be
initialized in Compatible
or Enhanced mode of
operation.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description