The Pull Tractor; Installation And Use - Epson FX-1050 User Manual

The Pull Tractor

The optional pull tractor
FX-1050) provides optimum continuous paper handling. The pull tractor
is especially useful with continuous multi-part forms and labels. For best
results, use the pull tractor along with the built-in push tractor, as
described in this section.
After making sure that you have both parts of the pull tractor option as
shown below, remove the packing material and save it in case you need
to ship the unit later.
Caution: The short tear-off
tractor. Before you start printing
DIP switch
l-5 is set to on. (Short
DIP switch is set to on. See the section on setting DIP switches in
Chapter 3.)

Installation and use

After making sure that the printer is turned off, install and use the pull
tractor as follows:
1. Remove the printer cover and the paper guide and install the paper
rest if you haven't already. (See Chapter 2.)
Using Printer Options
for the FX-850 and #7312 for the
(#7311
function cannot be used with the pull
the pull tractor, make sure that
with
tear-off is turned off only when the
7-15