Single Sheet Insertion - Epson FX-1050 User Manual

Single sheet insertion

Your cut sheet feeder also has a single sheet loading feature. This feature
allows you to switch to a different type of paper (such as letterhead)
without replacing the supply of paper that is loaded in your cut sheet
feeder. Single sheet insertion is especially useful because it allows you to
use micro-adjustment to change your cut sheet feeder loading position.
1. Press the ON LINE button to take the printer off line.
2. Align the single sheet to be fed with the marking on the left paper
guide, and then slide the sheet into the printer path until you feel
resistance.
3. Press the LOAD/EJECT button to load the sheet.
Note: If you want to use single sheet insertion for two or more
consecutive pages, pull the cut sheet feeder's paper set levers forward;
otherwise, the next sheet is loaded from paper stored in the cut sheet
feeder bin.
4. Press the ON LINE button to put the printer on line. Now you can use
micro-adjustment to change the loading position for your cut sheet
feeder. See the section on micro-adjustment in Chapter 2.
7-14 Using Printer Options