Running The Self Test - Epson FX-1050 User Manual

Running the self test

The self test can be run in draft mode or near letter quality (NLQ) mode.
Follow the steps below.
1. Load a sheet of paper as described above.
WARNING: Never run the self test using paper that is
narrower than 8¼ inches if you have an FX-850, or
if you have an FX-1050, because you may seriously damage
the print head.
2. Turn off the printer.
3. While holding down the LINE FEED button, turn on the printer. After
printing starts, release the LINE FEED button.
1-16
14 inches
Setting Up the Printer