Epson FX-1050 User Manual page 166

ESC W
Format:
ASCII code:
Decimal :
Hexadecimal:
Comments:
The following values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
Double-wide mode doubles the width of all characters. This command
is available in both draft and NLQ.
ESC w
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
Double-hi mode doubles the height of all characters. Superscript,
subscript, and condensed modes are not valid in the double-high
mode. This command is available in both draft and NLQ.
8-28
ESC W
n
27 87
n
1B 57 n
(The ASCII codes 0 and 1 or the ASCII
characters "0" and "1" can be used.)
ESC
27 n
l19
1B 77
n
(The ASCII codes 0 and
characters "0" and "1" can be used.)
Turn Double-Wide Mode On/Off
Turn Double-High Mode On/Off
n
or the ASCII
1
Command Summary