Epson FX-1050 User Manual page 89

NLQ. Your printout also gives you nine numbers, which you use in the
next program. You should get the printout you see below:
When you get to this point with a character of your own, you see how it
looks. If you want to make any changes, move the dots as needed and
rerun the program.
If you want to put dots in the bottom row, change the number in line
190 from 128 to 0. Then the usable rows are those shown in the figure
below.
Second definition program
Once the character looks the way you want it to, you can enter, modify,.
and run the next program. The program listed here creates the Mercury
character, but you can use it for any characters you create if you make
one or two changes, as explained after the program listing.
4-24
Using Software and Graphics