Word Processing - Epson FX-1050 User Manual

Word Processing

ESC a
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
0: Selects left justification.
Selects centering.
1:
Selects right justification.
2:
Selects full justification.
3:
The default setting is n =
when the buffer becomes full. The commands HT and BS are invalid
except in n = 0 mode. For n = 3 there must be no carriage returns
within a paragraph. This command is available in both draft and
MQ.
ESC SP (space)
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Sets the amount of space added to the right of each character, in
addition to the space already allowed in the design of the character.
The number of units of space is equal to n, which should be from
0 to Each unit of space is 1/120th of an inch. This command is
127.
available in both draft and NLQ.
8-32
ESC
27 97 n
n
1B 61
Full justification (n = 3) is performed
0.
ESC SP
n
27 32
n
1B 20
n
Set Intercharacter Space
n
Select Justification
Command Summary