Epson FX-1050 User Manual page 148

ESC U
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
Printing is normally bidirectional. This command selects unidirectional
printing for more accurate positioning.
ESC 8
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Turns off the paper-out sensor so that you can print to the end of a
single sheet of paper.
ESC 9
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Cancels ESC 8. Therefore, the printer beeper sounds and printing stops
when the printer reaches a point approximately
the end of the paper.
8-10
ESC U n
27 85 n
1B 55 n
(The ASCII codes 0 and
characters "0" and "1" can be used.)
ESC 8
27 56
1B 38
ESC 9
27 57
1B 39
Turn Unidirectional Mode On/Off
1
Disable Paper-Out Sensor
Enable Paper-Out Sensor
of an inch from
l/2
Command Summary
or the ASCII