Printing With The Pull Tractor - Epson LX-300+II Reference Manual

Printing with the pull tractor

To load continuous paper using the pull tractor, you must move
the tractor to the pull tractor position, as described below. If
your tractor is already installed in this position, make sure the
printer is turned off and skip to step 6.
1. Turn off the printer.
2. Remove the printer cover and the paper guide.
3. Remove the paper tension unit by gently squeezing the lock
tabs and pulling it out of the printer.
4. Pull the paper release lever forward to the continuous paper
position.
Paper Handling
17