Epson FX-1180+ User Manual page 70

The printer does not load continuous paper or does not feed it
properly.
Cause
The paper release lever is
not set correctly.
Single-sheet paper is in the
paper path.
Continuous paper is not
loaded properly.
The paper-thickness lever is
not set correctly.
The printer does not feed continuous paper to the standby
position.
Cause
You have not torn off the
printed pages before
pressing the Load/Eject
button.
4-6
Troubleshooting
What to do
Set the paper release lever to the
position for the paper source you
want to use. See "Setting the Paper
Release Lever" on page 2-1.
Press the Load/Eject button to eject
the sheet.
See Chapter 2 or the online Reference
Guide for instructions on loading
continuous paper with the tractor you
want to use.
Set the paper-thickness lever to match
the thickness of your paper, as
described on page 2-2.
What to do
Tear off the printed pages at the
perforation. Then press the
Load/Eject button to feed the paper
backward to the standby position.