Epson FX-1180+ User Manual page 36

2. Make sure the paper guide is in the upright position. Then
set the paper-thickness lever to 0 if you are using ordinary
single-sheet paper. (If you are using envelopes, see
"Envelopes" on page 2-24 to set the lever.)
Also move the paper release lever to the
single-sheet position.
3. Turn on the printer, if necessary.
4. Slide the left edge guide until it locks in place next to the
triangle mark on the paper guide. Next adjust the right edge
guide to match the width of your paper.
5. Insert a sheet of paper with the printable side down between
the edge guides until it meets resistance. The printer feeds
the paper automatically and is ready to print.
2-14
Paper Handling