Epson FX-1180+ User Manual page 72

c
Caution:
Never use the knob to adjust the top-of-form position; this may damage
the printer or cause it to lose the top-of-form position.
Wrong tear-off position
The printer prints on (or too far away from) the perforation of
your continuous paper.
Cause
The tear-off position setting
is incorrect.
c
Caution:
Never use the knob to adjust the tear-off position; this may damage the
printer or cause it to lose the tear-off position.
You moved the paper using
the knob while the printer
was on.
The printer you want to use
is not selected in your
software.
The paper size setting in
your application or printer
driver does not match the
size of the paper you are
using.
The printer's page length
settings for the front or rear
tractor do not match the size
of the paper you are using.
4-8
Troubleshooting
What to do
Adjust the tear-off position using the
Micro Adjust function. See
"Adjusting the tear-off position" on
page 2-27.
Adjust the tear-off position using the
Micro Adjust function. See
"Adjusting the tear-off position" on
page 2-27.
Choose the correct printer from the
Windows desktop or in your
application before printing.
Check the paper size setting in your
application or printer driver.
Check the page length settings for the
front or rear tractor using the printer's
default-setting mode. See "About
Your Printer's Default Settings" on
page 3-4.