4. Press the LF/FF D button to move the top-of-form position
up on the page, or press the Load/Eject U button to move
the top-of-form position down on the page.
5. Press the Pause button to exit the Micro Adjust mode.
Note:
❏ The printer has a minimum and a maximum top-of-form
position. If you try to adjust it beyond these limits, the printer
beeps and stops moving the paper.
❏ When the paper reaches the default top-of-form position, the
printer beeps and stops moving the paper briefly. You can use
this setting as a reference point when adjusting the position.
❏ The top margin setting made in some software overrides the
top-of-form position setting you make with the Micro Adjust
function.
2-30
Paper Handling