Epson FX-1180+ User Manual page 50

c
Caution:
Never use the knob to adjust the tear-off position; this may
damage the printer or cause it to lose the tear-off position.
1. You may need to press the Tear Off/Bin button to advance
the paper to the tear-off position. Make sure the Tear
Off/Bin light is flashing (the paper is at the current tear-off
position).
2. Hold down the Pause button for about three seconds. The
Pause light begins flashing and the printer enters the Micro
Adjust mode.
3. Press the LF/FF D button to feed paper backward, or press
the Load/Eject U button to feed paper forward, until the
paper perforation is aligned with the tear-off edge of the
printer cover.
2-28
Paper Handling
tear-off edge of
the printer cover
paper perforation