Epson FX-1180+ User Manual page 27

7. Close the sprocket covers.
8. Slide the right sprocket to remove any slack in the paper;
then lock it in place by pushing the sprocket lock down.
9. Attach the front cover with the continuous paper positioned
as shown below.
10. Make sure the paper guide is lying flat on the printer and the
edge guides are open all the way to the left and right. Then
raise the continuous paper support.
11. Turn on the printer. When the printer receives data, it
automatically loads the paper and starts printing.
If the first line on your page appears too high or low, you can
change its position by using the Micro Adjust function as
described on page 2-27.
c
Caution:
Never use the knob to adjust the top-of-form position; this may
damage the printer or cause it to lose the top-of-form position.
Paper Handling
2-5