Using The Pen Tablet - Brother Quattro 6000D Operation Manual

b
Gently pull the pen tip straight out.
c
Push in the new pen tip until it is flush with
the tablet pen.

Using the Pen Tablet

The included pen tablet, connected to the sewing
machine, can be used when creating your original
embroidery pattern with My Custom Design. Also, you
can use the pen tablet as a USB mouse when operating
your sewing machine. Connect the pen tablet to the
USB 1.1 port marked with
the pen tablet to the other USB port (USB 2.0) when not
using the My Custom Design program.
a
USB port for mouse
b
Pen tablet
After connecting the pen tablet to the sewing machine,
it is activated when the pointer appears on the screen.
The blue LED light on the tablet is the main indicator
for hardware operation. The LED normally stays off, and
will turn on when you touch the surface of the pen
tablet with the tablet pen.
a
a
Working area of the pen tablet
b
Blue LED light
4
. You can also connect
Note
• The pen tablet can be connected or disconnected at
any time.
• Do not perform any operations with the pen tablet at
the same time that you are touching the machine's
LCD screen with your finger or the included touch
pen (stylus).
Memo
• Working area of the pen tablet differs depending on
performing functions of the sewing machine.
a Working area for normal machine operation
b
Working area when drawing with the pen tablet using
the My Custom Design program
■ Using with My Custom Design
a
Select your favorite picture for creating
embroidery pattern.
b
Insert the picture under the tablet sheet.