Running A System Test - Sony SAT-A4 Operating Instructions (primary manual) Operating Instructions Manual

Running a System Test

If The System Test Reports
Any Problems...
The System Test lets you check the integrity of your system's
components, including:
q Antenna signal
q System tuning
q Phone line
q Access card
Use the System Test if you are experiencing problems with your
system.
To run the System Test:
1
Select SYSTEM TEST from the Setup Menu.
2
Select TEST.
RUN SYSTEM TEST
SIGNAL
TUNING
PHONE
CARD
The System Test checks all the components automatically, and
displays the result of each test.
3
Select RETURN to return to the Setup Menu.
Check your system for any of the following:
q Check that all cables are connected properly to the Digital Satellite
Receiver.
q Check that the Satellite Antenna is installed correctly, and that the
signal has been optimized. See the manual that came with the
Satellite Antenna for details.
q Check that the phone line connected to the Digital Satellite
Receiver is working properly.
q Check that the access card is inserted properly.
If you cannot resolve problems reported by the System Test, see
"Customer Support" on page 2.
TEST
RETURN
HELP
75