Table of Contents
Advertisement
The channels you no longer receive or seldom watch can
be deleted from the memory. (Of course, you can later
add the deleted channel into the memory again.)
• Be sure to check that the POWER and the VCR/TV
indicators are both on.
• Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on
the back of the VCR to match the channel
[BaCk o f
selected on the TV.
the VCnl
1 Select main menu
-.ENU-
"_
J
Press the MENU button until the
_¢-_._ ,,,_=
main menu appears.
_'_
2 Select "CHANNEL
SET
UP"
Press the PLAY/& or STOP/V button to point to"CHAN-
NEL SET UP". Then, press the EFWD/I_
button.
3 Select "MANUAL SET UP"
e_Am_L SETLm
Press the PLAY/A or STOP/Y but-
,_u,
ton to potht to '_MANUAL SET Up ,,"
.....
Then, press the EFWD/I_
button.
4 Enter the desired channel number
Press the number buttons or the
"_'_-_'
-/
PLAY/A or STOP/Y button until
_
I*_
TM'
/
your desired channel number ap-
'_l_
pears. (Example: CH30)
5 Delete it from memory
Press the F.FWD/IP. or REW(IND)/.ql
button so that
'q3ELETE" flashes on the TV screen.
• To delete another channel, repeat steps [4] and [5].
• If you press the F.FWD/I_
or REW(IND)/_I
button
again, the channel is memorized
again.
MI_U/,L S_ Up
=-;*_.s*Et
_
[TV)
- DELETED
-
- MEMORIZED -
6
Exit the preset mode
Press the RESET/EXIT
button to return to TV mode.
NOTE:
To confirm that channel(s) has been deleted or
added, press the CHANNEL at or • button.
Remember:
If your cable box or satellite box is con-
nected as in Fig 4 on page 11 or Fig 5 on
page 12, you DO NOT have to set up the
channels. Just select the TV and VCR to
channel
3 or 4 and
also
have
the
CH3/CH4 switch on the back of the VCR
to match the channel you selected (CH 3
or CH 4). Now select the Box to the chan-
nel you wish to view or record.
1) Press the MENU button until the main menu appears.
2) Press the PLAY/at
or STOP/Y
button to point to
"CHANNEL SET UP". Then, press the F.FWD/I_ but-
ton.
/.
3) Confirm "AUTO SET UP" is i
..........
|
pointed
to, then
press
the
!" _°°_
J
F.FWD/_
button. After scan-
ning, the tuner stops at the low-
est memorized channel.
• The VCR distinguishes
between standard TV chan-
nels and cable channels.
If you want to change the language on the TV screen,
follow the steps below:
Note: This function effects only the language on the
screen menu and not the audio source.
l ) Press the MENU button until the main menu appears.
2) Press the PLAY/at
or STOP/•
button to point to
"LANGUAGE
SELECT".
Then,
press
the
3) Select
"ENGLISH"
or
.....
"ESPA/qOL"=
Spanish using
_,_o_
the PLAY/at or STOP/Y but-
ton.
4) Press the RESET/EXIT
but-
ton to return to TV mode.
NOTE: If for some reason the menu is in Spanish, press
the MENU button until the math menu appears, press the
PLAY/at button to point to "SELEC. 1DIOMA", press the
EFWD/I_
button, press the PLAY/at button to point to
"ENGLISH", then press the RESET/EXIT button.
-16-
EN
9J27
H58M0
Advertisement
Table of Contents
