Canon VIXIA HFS21 Instruction Manual page 61

[Aute Retate]; Photos that were recorded in portrait orientation (by turning
the camcorder on its side), will be rotated automatically and displayed
correctly during playback.
[Phete Review Time]; Selects the time to display a photo after it has been
recorded.
• The review time can only be set when the drive mode is set to
[I--I Single].
[Phete Numbering]; Select the photo numbering method to be used on a
new memory card. Photos are automatically assigned consecutive num-
bers from 0101 to 9900, and stored in folders containing up to 100 pho-
tos. Folders are numbered from 101 to 998.
[l'a_ Reset]: Photo numbers will restart from 101-0101 every time you
insert a new memory card.
[_ Continuous]: Photo numbers will continue from the number following
that of the last photo recorded with the camcorder.
• If the memory card you insert already contains a photo with a larger
number, a new photo will be assigned a number one higher than that of
the last photo on the memory card.
• We recommend using the [_ Continuous] setting.
• The photo number indicates the name and location of the file on the
memory card. For example, the file name of a photo numbered 101 -
0107 is "IMG 0107.JPG', stored under the folder "DCIM\101 CANON".
[USB Cennect[ee Type]; Select the connection protocol to use when con-
necting the camcorder to an external device using the supplied USB
cable.
[S DVD Burner]: To connect exclusively to the optional DW-100 DVD
Burner.
[D. Computer/Printer]: To connect to a computer, printer or similar USB
peripheral.
[-_7_ Connect and Set]: To make the selection from a screen that
appears at the time of the connection to the external device.
Additional Information - 163