Additional Functions; Taking Photosin M Manualmode - Canon VIXIA HFS21 Instruction Manual
Hd camcorder
Hide thumbs
Also See for VIXIA HFS21:
- Workshop manual (11 pages) ,
- Instruction manual (219 pages) ,
- Brochure (27 pages)
Table of Contents
Advertisement
AdditionalFunctions
Taking Photosin M ManualMode
Operating modes:
1
1 Set the mode switch to M.
2 Turn on the camcorder.
• By default, photos are recorded in
the built-in memory (_
only)
or on memory card I_1 (llr,@l_[_).
You can select the memory that will
be used to record photos ([_[} 38).
• Please read the IMPORTANT
section before using an Eye-Fi
card.
3 Touch [a]
to switch to
mode.
4 Press "PHOTOhalfway.
Once the focus is automatically adjusted, _ will turn green and one or
more AF frames will appear.
5 Press
PHOTO
fully.
The ACCESS indicator will flash as the photo is being recorded.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
• When recording photos on an Eye-Fi card in memory card slot I_Jl,pho-
tos will be uploaded automatically if you are within the range of a config-
ured network. Always verify that Eye-Fi cards have been approved in
the country/region
of use. See also Using an Eye-Fi card (_
150).
108 • Photos
Advertisement
Table of Contents
