Lower Threading; Winding The Bobbin; Using The Supplemental Spool Pin - Brother BP2100 Operation Manual

LOWER THREADING

Winding the Bobbin

→
Press
in this order to display a video example of
bobbin winding on the LCD (see page B-30).
Follow the steps explained below to complete the
operation.
CAUTION
• The included bobbin was designed specifically
for this machine. If bobbins from other models
are used, the machine will not operate
correctly. Use only the included bobbin or
bobbins of the same type (part code: SA156,
(SFB: XA5539-151)).
* Actual size
a This model
b Other models
c 11.5 mm (approx. 7/16 inch)
→ →

■ Using the Supplemental Spool Pin

With this machine, you can wind the bobbin
without unthreading the machine. While using the
main spool pin to sew, you can conveniently wind
the bobbin using the supplemental spool pin.
a Supplemental spool pin
a
Turn the main power to ON and open the
top cover.
b
Align the groove in the bobbin with the
spring on the bobbin winder shaft, and set
the bobbin on the shaft.
a Groove in the bobbin
b Spring on the shaft

LOWER THREADING

Basic operations B-31
B
1