Brother BP2100 Operation Manual page 63

d
Press to move the LED pointer
on the fabric for adjusting the first position.
e
Press to apply the setting.
f
Press to move the LED pointer
on the fabric for adjusting the second
position.
g
Press to apply the setting.
h
The preview in the embroidery screen is
updated according to the specified
embroidering position.
i
Press the "Start/Stop" button to start
embroidering.
Note
• When using the sensor pen to specify the
embroidering position, it may not be
possible to exactly specify the desired
location. In this case, move the embroidery
frame to align the center of the pattern with
the location indicated by the LED pointer.
USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE
Basic operations B-61
B
2