Therma-Stor Phoenix D385 Owner's Manual
  1. Manuals
  2. Brands
  3. Therma-Stor Manuals
  4. Dehumidifier
  5. Phoenix D385
  6. Owner's manual

Therma-Stor Phoenix D385 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual — Phoenix D385
The Phoenix D385 provides the perfect combination of
features and performance the restoration industry has been
craving in a desiccant dehumidifier. Designed to operate
vertically or horizontally, the Phoenix D385 provides the
wide operating range and ultra-low grains of a desiccant
with the water removal capacity of the largest LGR's in
cabinet dimensions identical to our popular Phoenix
200 Max.
The D385 delivers 385 CFM of ultra-low grain process air
and removes an incredible 6 pints per day at AHAM
conditions. The true four hole configuration* allows the
Phoenix D385 to be located in the affected area with the
75 CFM re-activation air stream isolated from the drying
chamber. Three hole designed units** inherently pull
unaffected and/or outside air into the drying chamber. The
D385's four hole design allows the restoration contractor
to set-up for effective positive, neutral or negative pressure
operation.
Able to operate vertically or horizontally, the D385 will fit
inside most crawlspaces. Having the D385 securely inside,
rather than outside the crawlspace access, deters the
The Phoenix D385 Desiccant Dehumidifier
• Ultra low grains
• Wide operating range
• 6 pints per day @ AHAM
• Operates vertically or horizontally
• Process airflow 385 CFM
• Two 23' power cords:
 Amps per cord
22 Amps
5 Volts/60 Hz
• Unlimited ducting possibilities
• Legendary stainless construction
Specifications subject to change without notice.
Toll-Free 1-800-533-7533
PO Box 8680 • Madison, WI 53708
Installation, Operation & Service Instructions
Read and Save These Instructions
possibility of tampering with the dehumidifier or the set-
up. The 385 CFM of process air will provide 3 ACH on an
affected area up to 7000 cubic feet.
The Phoenix D385 is easy to transport and set-up. The
D385 will fit on your truck in the areas already designed
for your LGR's and will move around the jobsite with the
same portability. All the power to the unit is provided by two
5 volt grounded power cords. Simply plug the cords into
separate 5 amp circuits. Each cord draws only  amps
to power the D385. The re-activation air stream is ducted
through 6" flex duct provided with the unit and stores
conveniently in the top of the unit.
*Having completely separate process and regeneration airstreams.
**Where regeneration airstream is pulled from the process airstream.
Phoenix D385
PN 4026700

www.usephoenix.com • sales@thermastor.com
TS-387
Revised 7/07

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Phoenix D385 and is the answer not in the manual?

Questions and answers

Related Manuals for Therma-Stor Phoenix D385

Summary of Contents for Therma-Stor Phoenix D385

  • Page 1 PO Box 8680 • Madison, WI 53708 Owner’s Manual — Phoenix D385 Installation, Operation & Service Instructions Read and Save These Instructions The Phoenix D385 provides the perfect combination of possibility of tampering with the dehumidifier or the set- features and performance the restoration industry has been up.

  • Page 2: Table Of Contents

    1 Specifications Table of Contents Introduction .............. Part No. 4026700 1. Specifications ............2 Power 2 circuits:  Amps, 5 VAC each 2. Operation .............3 22 Amps total power consumption 2. How The Phoenix D385 Works ......3 Water 6 pints per day AHAM 2.2 Avoiding Secondary Damages ......3 Removal 2.3 Universal Use Set-Up ........3...

  • Page 3: Operation

    2 Operation 2.2 Avoiding Secondary Damages The D385 is a powerful tool capable of removing a great 2.1 How the Phoenix D385 works deal of water from most environments. Care must be Your Phoenix D385 has two separate air streams that run taken to avoid secondary damages of over-drying and or through it –...

  • Page 4: Location

    2.4 Location 2.6B Pilot Light The power indicator lamp illuminates to indicate that the Note the following precautions when locating the Phoenix D385 is functioning properly. This indicator is helpful when D385: a job site is too noisy to know what equipment is running properly.

  • Page 5: Storage And Transportation

    4 Service 2.8 Storage and Transportation The Phoenix D385 can be transported and stored in either upright or horizontal positions. There is a storage compartment under the top cover of CAUTION: Servicing the Phoenix D385 with its high voltage your dehumidifier. This compartment is large enough to circuitry presents a health hazard which could result in store reactivation collars, power cords, filter (as used), as death, serious bodily injury, and/or property damage.

  • Page 6: Service Parts List

    6 Service Parts List Item Part No. Description Item Part No. Description 4025076 FAN, MOTORIZED IMPELLER, PROCESS AIR 4025078 CORD, 4/3. SjT, 5V 4025224 CAPACITOR, RUN, 5 MFD, 370V, DRY, PROCESS AIR W/PLUG 25’ (2 PLACES) Shown 4026784 COLLAR, SHORT 6” REACTIVATION DUCT (2 PLACES) 4026922 GASKET AND BELT 402635...

  • Page 7: Warranty

    Phoenix D385 Dehumidifier Limited Warranty Warrantor: Therma-Stor LLC PO Box 8680 Madison, WI 53708 Telephone: -800-533-7533 Who Is covered: This warranty extends only to the original end-user of the Phoenix D385 dehumidifier, and may not be assigned or transferred. One Year Warranty: Therma-Stor LLC warrants that, for one () year the Phoenix D385 dehumidifier will operate free from any defects in materials and workmanship, or Therma-Stor LLC will, at its option, repair or replace the defective part(s), free of any charge.

Table of Contents