Formatting Diskettes With One Diskette Drive; (No Hard Disk) - Epson 10020 User Manual

Formatting Diskettes With One Diskette Drive

(No Hard Disk)

If your computer has only one diskette drive and no hard disk,
follow this procedure to format a diskette:
1. Insert the working copy of your MS-DOS Startup diskette
in drive A.
2. When you see the
Enter:
FORMAT A:
You see this prompt:
Insert new diskette for drive A:
and strike ENTER when ready
3. Remove the MS-DOS Startup diskette from the diskette
drive. insert the diskette you want to format into drive A
and press Enter.
4. When the diskette is formatted, you see a message similar
to this:
Format complete
362496 bytes total disk space
362496 bytes available on disk
Format another (Y/N)?
At this point, you can either format another diskette by
pressing Y and Enter, or return to the MS-DOS command
prompt by pressing N
3-28 Using MS-DOS With Your Computer
A>
prompt, type the following and press
and Enter.